Product Description:

 DYNOL PROTECH 5W40 SN FULL SYNTHETIC MOTOR OIL – SN/CF is a fully-synthetic engine oil specially designed for excellent performance under all conditions. It provides fast lubrication of the engine. It helps to extend engine life by protecting surface from wear and reduces engine deposits. The special additives added to contribute to a significant reduction in engine noise. It provides outstanding oxidation stability, long-life properties and extended drain intervals. It is produced expertly to maintain the efficiency of Car Emission Reduction Systems in both diesel and gasoline powered automobiles.


It is designed for petrol and diesel engines, including turbocharged and fuel injection. The new formulation continues to meet the recommendation of all major automotive builders (OEMs) throughout Europe, America, Japan and Asia. With the DYNOL PROTECH 5W40 SN Full Synthetic Motor Oil – SN/CF you get the best in all-year protection.


  • Excellent high-temperature/high shear performance
  • Excellent overall lubrication
  • Maintains high oil pressure
  • Very efficient anti-deposit and anti-black sludge power which maintains a clean engine
  • Prevention of carbon and lacquer deposits on vital moving parts caused by very high engine temperature
  • Exceptional oil film stability through anti-wear protection in all loads
  • Outstanding thermal stability and oil oxidation resistance to maintain a high standard of piston cleanliness

Meets the performance:          

API SN/CF, ACEA A3/B3/B4, BMW LL01, Renault RN 0700, MB 229.3, VW 502.00/505.00

   Technical Data:

DYNOL Test method
SAE Grade   5W40
Density at 15°C gr/cm³ ASTM D 1298 0.852
Viscosity at 40°C cSt ASTM D 445 87-90
Viscosity at 100°C cSt ASTM D 445 13.9-14.2
Viscosity Index ASTM D 2270 163
CCS Viscosity at -30°C, mPa.s ASTM D 5293 Max. 6600
Flash point   °C ASTM D 92 235
Pour point    °C ASTM D 97 -42
Total Base Number mg KOH/g ASTM D 2896 7.6-8
Sulphated Ash,% ASTM D 874 1.1

Above values are the typical values of the products and may vary with each batch.

1L: 11118.001

4L: 11118.004

20L: 11118.020

209L: 11118.209

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals

Leave a Reply

Your email address will not be published. Required fields are marked *