Product Description:


DYNOL PROTECH 5W30 SN Full Synthetic Motor Oil – SN/CF that is formulated with high quality full synthetic base oil formula. It has advanced formulation with most effective additives and blended using latest technology. It is a fully-synthetic engine oil specially designed with improved fuel efficiency performance. It offers superb cold start protection therefore, reduces engine wear and tears significantly. The special additives added to contribute to a significant reduction in engine noise. It provides outstanding oxidation stability, long-life properties and extended drain intervals. It reduces oil and fuel consumption and that ensures fast lubrication of the engine. It is produced expertly to maintain the efficiency of Car Emission Reduction Systems in both diesel and gasoline powered automobiles.


It is designed for petrol and diesel engines, including turbocharged and fuel injection. The new formulation continues to meet the recommendation of all major automotive builders (OEMs) throughout Europe, America, Japan and Asia. With the DYNOL PROTECH 5W30 SN Full Synthetic Motor Oil – SN/CF you get the best in all-year protection.



  • Excellent high-temperature/high shear performance
  • Excellent overall lubrication at cold ambient temperatures
  • Good fuel economy
  • Maintains high oil pressure
  • Very efficient anti-deposit and anti-black sludge power which maintains a clean engine
  • Prevention of carbon and lacquer deposits on vital moving parts caused by very high engine temperature
  • Neutralization of the acids
  • Exceptional oil film stability through anti-wear protection in all loads
  • Outstanding thermal stability and oil oxidation resistance to maintain a high standard of piston cleanliness


Meets the performance:          

API SN/CF, ACEA A5/B5, BMW LL01, Renault RN 0700, MB 229.3, VW 502.00/505.00, Ford WSS M2C937-A

   Technical Data:

DYNOL Test method  
SAE Grade   5W30
Density at 15°C gr/cm³ ASTM D 1298 0.85-0.86
Viscosity at 40°C cSt ASTM D 445 69-74
Viscosity at 100°C cSt ASTM D 445 11.5-12.2
CCS Viscosity at -30°C, mPa.s ASTM D 5293 Max. 6600
Viscosity Index ASTM D 2270 156
Flash point   °C ASTM D 92 225
Pour point    °C ASTM D 97 -42
Total Base Number mg KOH/g ASTM D 2896 7.5-8
Sulphated Ash % ASTM D 874 1.1

Above values are the typical values of the products and may vary with each batch.

1L: 11117.001

4L: 11117.004

20L: 11117.020

209L: 11117.209

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals7

Leave a Reply

Your email address will not be published. Required fields are marked *