Product Description:


DYNOL ULTRON 0W40 LL Full Synthetic Motor Oil – SN/GF-5 is specially designed for the most demanding modern high performance engines using the most advanced formulation fortified with high quality additives and PAO (Polyalphaolefin) base oils. It provides superior engine protection for the entire drain interval. These oils are formulated for excellent oxidation stability for long product life and excellent resistance to viscosity breakdown. The PAO synthetic base stocks offer low volatility required to perform the harshest temperatures.


DYNOL ULTRON 0W40 LL Full Synthetic Motor Oil – SN/GF-5 is suitable for all gasoline, diesel, gas or dual fuel engines of passenger cars, light duty commercial vehicles, and off-road SUV’s requiring API SN/GF-5 with 0W40 viscosity grade or as recommended by the OEMs.


  • The wider temperature range capability of the synthetic base fluid ensures correct oil viscosity which reduces friction at startup and provides maximum lubrification during high temperature operation.
  • The effective anti-wear additive system minimizes wear in even the most sophisticated valve train mechanisms, including those with variable valve timing, maximizing engine life.
  • Metallic detergent and ashless dispersant additive system ensure maximum power and performance by providing superior control of the ring belt and the piston skirt deposits, even under the most severe operating conditions.
  • Special friction modifiers assist in reducing friction.
  • Synthetic, highly shear-stable formulation provides superior control of oil flow through the ring belt area by maintaining oil viscosity, and reduces oil evaporation at the elevated ring zone temperatures experienced under all operating conditions.
  • Special anti-wear additive package reduces wear by protecting surfaces when load causes breakdown of the lubricant film, helps longer equipment life.
  • Highly advanced additive technology delivers reduction in harmful exhaust emissions and lowering impact emissions.

Meets the performance:          

API SN/GF-5, ACEA A3/B3/B4/C2/C3, MB 229.31/229.51/229.52, Dexos 2®, GM 6094M/4718M, VW 502.00/505.01/504.00, Ford WSS M2C946-A/M2C929-A, BMW LL04, Porsche C30, JASO DL-1, Honda HTO-06, Chrysler 6395

Technical Data:

DYNOL Test method
API   SN/GF-5 
SAE Grade   0W40
Density at 15°C gr/cm³ ASTM D 1298 0.85-0.86
Viscosity at 40°C cSt ASTM D 445 70-74
Viscosity at 100°C cSt ASTM D 445 12.9-13.2
CCS Viscosity at -35°C mPa.s ASTM D 5293 Max. 6200
Viscosity Index ASTM D 2270 184
Flash point   °C ASTM D 92 235
Pour point    °C ASTM D 97 -50
Total Base Number mg KOH/g ASTM D 2896 7.6-8
Sulphated Ash, % ASTM D 874 0.80

Above values are the typical values of the products and may vary with each batch.

1L: 11113.001

4L: 11113.004

20L: 11113.020

209L: 11113.209

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals

Leave a Reply

Your email address will not be published. Required fields are marked *