Product Description:

DYNOL SYNCRON AXLE LS 75W140 GL-5 Synthetic Gear Oil is a synthetic gear oil designed to provide optimum protection under extreme load conditions, whilst maintaining high efficiency providing excellent load-carrying capability where extreme pressures and shock loading are expected. It reduces wear and reduces noise when working under any conditions. It is manufactured using LS (Limited Slip) additives, which provides reliable operation in off-road vehicles and machines with 4×4 all-wheel drive. It is used both on and off track in synchronized and non-synchronized heavy-duty drivetrains and in rear axles. It provides excellent thermal and oxidation stability, extremely low pour point, and low-temperature fluidity. It is specifically designed for transaxles, gearboxes and also limited slip differentials. It does not need an additional friction modifier for use in limited slip differentials as the co-efficient of friction is high enough for ‘non chatter’ performance.


DYNOL SYNCRON AXLE LS 75W140 GL-5 Synthetic Gear Oil is recommended for used both on and off track in synchronized and non-synchronized heavy duty drive trains and in rear axles. It is especially effective in mechanical gearboxes for cars and trucks, as well as for vans with and without a lockable differential, where the use of GL-5 grade oil is regulated.


Benefits :

  • Compared to conventional hypoid gear lubricants, it performs stability and protection against thermal and oxidative degradation, wear and corrosion, and viscosity loss associated with premature shearing.
  • It provides extended service with increased efficiency
  • Lower gear wear due to enhanced frictional properties
  • Good high and low temperature shifting performance
  • Compatible with common seal materials
  • Excellent resistance to oxidation
  • Excellent corrosion protection capability
  • Prevents foaming


Meets Performance:           

API: GL-5 LS, SAE J2360, MACK GO-J, ARVIN MERITOR 0-76-M, MIL-PRF-2105E/L-2105 D, ZF TE-ML 21B/19C/16F/12B/07A/05A

Technical Data:

DYNOLTest method 
SAE Grade 75W140
Density at 15°C gr/cm³ASTM D 12980.86-0.87
Viscosity at 40°C cStASTM D 445190-206
Viscosity at 100°C cStASTM D 44524.4-25.5
Viscosity IndexASTM D 2270156
Flash point   °CASTM D 92235
Pour point    °CASTM D 97-38

Above values are the typical values of the products and may vary with each batch.

1L: 11143.001

20L: 11143.020

209L: 11143.209

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals.43

Leave a Reply

Your email address will not be published. Required fields are marked *