Product Description:

DYNOL SYNCRON AXLE 75W90 STO 1 GL-5 SYNTHETIC GEAR is a synthetic gear oil designed to provide optimum protection under extreme load conditions, whilst maintaining high efficiency providing excellent load-carrying capability where extreme pressures and shock loading are expected. It is used both on and off track in synchronized and non-synchronized heavy-duty drivetrains and in rear axles. It provides excellent thermal and oxidation stability, extremely low pour point, and low-temperature fluidity. It is specifically designed for transaxles, gearboxes and also limited slip differentials. It does not need an additional friction modifier for use in limited slip differentials as the co-efficient of friction is high enough for non-chatter performance.


Heavy duty automotive manual transmissions, axles, and final drives requiring API GL-5 and Scania STO 1:0 level performance. On-highway light and heavy duty trucks, busses and vans including Scania. Off- highway industries including: construction, mining, quarrying, and agriculture. Differentials, final drives, transfer cases and other gear applications where lubricants meeting API service GL-5, multipurpose, or EP gear lubricants are recommended.


Benefits :

  • Compared to conventional hypoid gear lubricants, it performs stability and protection against thermal and oxidative degradation, wear and corrosion, and viscosity loss associated with premature shearing.
  • It provides extended service with increased efficiency and higher fuel economy
  • Lower gear wear due to enhanced frictional properties, longer equipments life
  • Good high and low temperature shifting performance
  • Compatible with common seal materials


Meets Performance:

API: GL-5 LS, Scania STO 1:0, MACK GO-J PLUS, ARVIN MERITOR 0-76-M, MIL-PRF-2105E/L-2105 D, ZF TE-ML 21B/19C/16F/12B/07A/05A

Technical Data:

DYNOLTest method 
SAE Grade 75W90 
Density at 15°C gr/cm³ASTM D 12980.86-0.87
Viscosity at 40°C cStASTM D 445105-112
Viscosity at 100°C cStASTM D 44514.7-15.2
Viscosity IndexASTM D 2270141
Flash point   °CASTM D 92225
Pour point    °CASTM D 97-41

Above values are the typical values of the products and may vary with each batch.

1L: 11144.001

20L: 11144.020

209L: 11144.209

Please check your owner’s manual for the manufacturer’s recommended oil viscosity grade and API classification and approvals.

Leave a Reply

Your email address will not be published. Required fields are marked *